Pump series FP3
EHEDG certified
| Max. flow | 320 m³/h |
| Max. head | 120 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 90 kW |
Pump series FP3
The pumps have closed impellers with 3-dimensionally profiled blades and large passage and they are constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the FP3 pump series are perfectly cleanable, resulting in a reliable component for your production process.
These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
- Standardized mechanical seals to EN 12756 FDA approved bellow mechanical seals or sterile O-ring seals (spring not in contact with the liquid)
- Two seal diameters: - motor power ≤ 45 kW: Ø 43 mm - motor power > 45 kW: Ø 70 mm
Application areas
These perfectly cleanable process pumps are the ideal solution for filtration applications, pasteurisation, evaporating systems, yeast propagation and for CIP cleaning systems as well.
Typical applications include filtration of beer, wine andfruit juices as well as pumping yeast, whey and curd.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: perfectly cleanable
- Easy construction and easy maintenance: less downtime
- Easy to install
- 2 mechanical seal diameters for the entire range
- Robust construction
Technical information
| Performance | |
| max. flow rate | 320 m³/h |
| max. differential head | 120 m |
| max. discharge pressure | 15 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | closed with back vanes and balancing holes |
| max. free passage | 21 mm |
| max. motor power | 90 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | s single, quench, double |
| available O-ring material | EFDM, FKM, FEP-FKM, FFKM, Silicone |
| connectoins | sanitary fittings |
| surface finish | food quality, internal welds hand polished electropolished (casing 0.8 μm - impeller 3.2 μm) |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the FP3 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.