Pump series PRP2

3A-certified airhandling pump

max. flow 80 m³/h
max. head 75 m
max. product viscosity 10 cP
max. motor power 22 kW
Request for offer Download technosheet

Pump series PRP2

The pumps of the PRP2 series are perfectly cleanable EHEDG and 3A certified air handling pumps and are mainly used to pump a mixture of liquid and air. These perfectly cleanable pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non porous and extremely smooth. The pumps have fully machined open impellers constructed in 1.4435 material. Thanks to its crevice-free design and electropolishing as a final surface treatment, the PRP2 pump series are perfectly cleanable, resulting in a reliable component into your production process.

  1. Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
  2. Unique air handling design with cleanable air separator
  3. By-pass to casing taking care about air evacuation
  4. Fully drainable
  5. 5 Monobloc execution with std. IEC motors

Application areas

Thanks to its unique air handling design based on a standard centrifugal pump, the PRP2 series are particularly suitable as CIP return pump!

 

 

Your benefits

  • Higher pump efficiency compared with a classic liquid ring pump
  • Low NPSH values: less risk on cavitation
  • Electropolished: perfectly cleanable
  • Easy & robust construction and easy maintenance: Less downtime
  • Limited noise level
  • 1 mechanical seal diameter for the entire range
  • Fully certified (roughness value, FDA, USP, 3.1 for wetted parts, certificate of conformity, etc.)
  • Suitable for SIP
  • Parts in contact < 0.4 μm

Technical information

 Performance  
 max. flow rate  80 m³/h
 max. differential head  75 m
 max. inlet pressure  10 bar
 max. liquid viscosity  10 cP (to guarantee air handling capabilities)
 max. temperature  140°C
 impeller type  open
 max. free passage  22 mm
 max. motor power  22 kW
 max. speed  3000/3600 rpm
 available frequency  50/60 Hz
Specifications  
materials wetted parts   stainless steel 316L for casing and backplate, 1.4435 for the impellers, duplex 1.4462 for metallic parts of the seal and impeller screw
 mechanical seal configuration   single, quench, double
 available O-ring material  EPDM, FKM, FEP-FKM, FFKM, Silicone
 connections  sterile connections
 surface finish   pharmaceutical quality, roughness value < 0.4 μm for wetted parts, electropolished, fully certified
 certificates & legislation certificaten pompserie 

 

Request for offer

Assembly and disassembly videos

For all different configurations of the PRP2 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.

Assembly video - configuration with sterile seal
Disassembly video - replacement of sterile seal
Request for offer
Interested or questions? Our people are at your service.
Contact us