The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc.
The pumps are available in cantilever execution up to 0,5 m length.
Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C.
They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
|max. flow rate||1000 m³/h|
|max. differential head||60 m|
|max. pump length||500 mm|
|max. liquid viscosity||500 cP|
|impeller type||open, semi-open, closed|
|max. free passage||45 mm|
|max. motor power||132 kW|
|max. speed||3000 rpm|
|available frequency||50/60 Hz|
|materials wetted parts||stainless steel 316L or similar|
|mechanical seal configuration||no seal - cantilever|
|available O-ring material||FKM - EPDM - special|
|connections||industrial or sanitary|
|surface finish|| industrial finish: welds are not hand polished
final surface treatment: electropolished
|certificates & legislation|