Pump series FP2

Hygienic process pump

max. flow 110 m³/h
max. head 110 m
max. product viscosity 1000 cP
max. motor power 45 kW
Request for offer Download technosheet

Pump series FP2

These pumps have stainless steel 316L pump casings constructed in thick cold rolled plate, 100% non-porous and extremely smooth. The pumps have open investment cast impellers, constructed in 316L or duplex materials. Thanks to its crevice-free design and electropolishing as a final surface treatment, the FP2 pump series are perfectly cleanable, resulting in a reliable component for your food production process.

  1. Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
  2. Pressed stainless steel in 2B quality plate, extremely smooth
  3. Large seal cavity to clean mechanical seal properly
  4. Monobloc execution with std. IEC motors

Toepassingsgebied

De Packo pompen van de FP2 serie worden vooral ingezet voor de meest veeleisende hygiënische toepassingen in zowat alle industrieën zoals bijvoorbeeld melkerijen, brouwerijen, stokerijen, drankenindustrie, etc.

Ze zijn de ideale oplossing voor filtratietoepassingen, pasteurisatie, indampsystemen, gistpropagatie alsook voor CIP-reinigingssystemen.

Tot de typische toepassingen behoren de filtratie van bier, wijn en vruchtensap alsook het verpompen van gist, wei en wrongel.

 

 

Your benefits

  • High pump efficiency resulting in lower energy consumption
  • Low NPSH values: less risk on cavitation
  • Electropolished: perfectly cleanable
  • Easy construction and easy maintenance: less downtime
  • Standard components
  • Easy to install
  • 2 mechanical seal diameters for entire range
  • Robust construction

Technical information

 Performance  
 max. flow rate  110 m³/h
 max. differential head  110 m
 max. inlet pressure  13 bar
 max. liquid viscosity  1000 cP
 max. temperature  140°C
 impeller type  open
 max. free passage  22 mm
 max. motor power  45 kW
 max. speed  3000/3600 rpm
 available frequency  50/60 Hz
Specifications  
 materials wetted parts  stainless steel 316L or similar
mechanical seal configuration  single bellow, sterile, quench, double
 available O-ring material  EPDM, FKM, FEP-FKM, FFKM, Silicone
 connections  sanitary fittings
 surface finish  food quality, internal welds hand polished.
Electropolished (casing 0.8 μm - impeller 3.2 μm).
 certificates & legislation certificaten pompserie 

Request for offer

Assembly and disassembly videos

For all different configurations of the FP2 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.

Assembly video - configuration with sterile seal
Disassembly video - replacement sterile seal
Request for offer
Interested or questions? Our people are at your service.
Contact us