Pump series MWP2
For wear-resistant applications
| Max. flow | 55 m³/h |
| Max. head | 60 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 11 kW |
Pump series MWP2
These robust pumps are made of thick walled cast duplex stainless steel materials and have open impellers. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process. The Packo pumps of the MWP2 series are used in all kinds of industries for the transfer of erosive / abrasive liquids.
- Solid investment cast duplex pump casing
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
These robust process pumps are often used as process pump for circulation of liquid feeding for animals, washing installations in potato and vegetable industry, diatomaceous earth (kieselgur) for filtration purposes, etc.
Your benefits
- Wear resistant duplex pump casing ideal for handling abrasive liquids.
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers
- 1 mechanical seal diameter for the entire range
Technical information
| Performance | |
| max. flow rate | 55 m³/h |
| max. differential head | 60 m |
| max. inlet pressure | 12 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | open |
| max. free passage | 22 mm |
| max. motor power | 11 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | duplex pump casings |
| mechanical seal configuration |
single bellow, quench, double |
| available O-ring materials | EPDM, FKM, Silicone |
| connections | BSP fittings, flanges according to EN1092-1/01 & 02, ANSI flanges, smooth tubes |
| afwerkingsniveau | industrial, internal welds not hand polished, electropolished |
| certificates & legislation |  |
