Pump series MCP3
Flow up to 1800 m³/h
| Max. flow | 1800 m³/h |
| Max. head | 75 m |
| Max. product viscosity | 500 cP |
| max. motor power | 250 kW |
Pump series MCP3
These robust pumps have stainless steel 316L cast pump casings and closed or channel investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
- Solid design thanks to investment cast pump casings and impellers
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
They are often used as process pump for contaminated water as well as for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables. Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Easy to install
- Very quiet operation
- Standard components
Technical information
| Application areas | |
| max. flow rate | 1800 m³/h |
| max. differential head | 75 m |
| max. discharge pressure | 12 bar |
| max. liquid viscosity | 500 cP |
| max. temperature | 140°C |
| impeller type | closed (with back vanes and balancing holes) – optional: channel impellers |
| max. free passage | closed impellers: 27 mm – channel impellers: 41 mm |
| max. motor power | 250 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration |
single bellow, single balanced, quench, double, pressurized barrier |
| available O-ring materials | EPDM, FKM, FEP-FKM, FFKM |
| connections | flanges according to EN1092-1/01 & 02, ANSI flanges |
| surface finish | industrial, internal welds not hand polished, electropolished |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the MCP3 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.
Assembly video - Configuration with bellow seal - Seal diameter 43 mm
Assembly video - Configuration with a sterile seal - Seal diameter 43 mm
Assembly video - Configuration with double seal - Seal diameter 43 mm
Assembly video - Configuration with bellow seal - Seal diameter 70 mm
Assembly video - Configuration with double seal - Seal diameter 70 mm
Disassembly video - Replacement of bellow seal - Seal diameter 43 mm
Disassembly video - Replacement of sterile seal - Seal diameter 43 mm
Disassembly video - Replacement of bellow seal - Seal diameter 70 mm