Pump series MCP2
Cast industrial pump
| Max. flow | 120 m³/h |
| Max. head | 65 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 22 kW |
Pump series MCP2
These robust pumps have stainless steel 316L cast pump casings and open or semi-open investment cast impellers constructed in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
- Solid design thanks to investment cast pump casings and impellers
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
These robust process pumps are often used as process pump for contaminated water as well as for CIP cleaning systems, filtration of wine, mash, beer, whey and blanching of vegetables.
Typical liquids: mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy and robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low cost spot welded versions
- 1 mechanical seal diameter for entire range
- Standard components
Technical information
| Application areas | |
| max. flow rate | 120 m³/h |
| max. differential head | 65 m |
| max. inlet pressure | 10 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | open or semi-open |
| max. free passage | 25 mm |
| max. motor power | 22 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single bellow, single balanced, quench, double, pressurized barrier |
| available O-ring materials | EPDM, FKM, FEP-FKM, FFKM, Silicone |
| connections | BSP fittings, flanges according to EN1092-1/01 & 02, ANSI flanges, smooth tubes |
| surface finish | industrial, internal welds not hand polished, electropolished |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the MCP2 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.