Pump series IMO
Submersible cantilever pump up to 200 ° C for hot frying oil
| Max. flow | 1000 m³/h |
| Max. head | 60 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 250 kW |
Pump series IMO
The Packo submersible cantilever pump series IMO are suitable for handling liquids with a temperature up to 200°C. They are especially constructed to handle liquids that are difficult to seal such as paints, varnishes, galvanic coatings, hot frying oil, etc.
The pumps have a working length of 500 mm. (= maximum level of the liquid above the suction of the pump)
The MCP3IMO pumps are also available on pedestal with a working length of 900 mm.
- Use of standard IEC motors. MCP3IMO pumps on bearing bracket can also be equipped with Nema frame motors.
- Connection for cleaning purposes
- Tapered shaft, fully machined
- High strength column support pipe. Rigidly maintains alignment between motor and casing. Protects pump shaft.
- By-pass for overflow
- Cantilever design = no mechanical seals, no plain bearings. Reduced downtime and operating costs. No bottom bearing, no oil or water pipes required to lubricate these bearings.
Application areas
Particularly suitable for pumping liquids that are difficult to seal such as hot frying oil up to 200° C.
They are also used for pumping waste water from industrial waste such as CIP, acids, condensate, etc.
Your benefits
- Cantilever design = leakage free (no seals and plain bearings)
- Sealless pump: reducing downtime and operating costs
- Electropolished: easy to clean
- Robust design
- Not sensitive for dry running
Technical information
| Performance | |
| max. flow rate | 1000 m³/h |
| max. differential head | 60 m |
| max. pump length | 500 mm |
| max. liquid viscosity | 1000 cP |
| max. temperature | 200°C |
| impeller type | open, semi-open, closed |
| max. free passage | 45 mm |
| max. motor power | 250 kW |
| max. speed | 3000 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | no seal - cantilever |
| available O-ring material | FKM - EPDM - special |
| connections | industrial or sanitary |
| surface finish | industrial finish: welds are not hand polished final surface treatment: electropolished |
| certificates & legislation |  |
