Pump series IFF
Free flow with large passage for pumping liquids with fibers and solids
| Max. flow | 360 m³/h |
| Max. head | 35 m |
| Max. product viscosity | 500 cP |
| max. motor power | 90 kW |
Pump series IFF
These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and can be equipped with open or vortex investment cast impellers stainless steel 316L or similar.
The pumps have a large clearance between the impeller and the pump casing and as a result they can handle solids, fibres, foils and leaves without any risk of clogging. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
- Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 30 mm
- Large clearance between impeller and pump casing
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The Packo pumps of the series IFF are used in a wide range of industries and applications.
You can find them in just about all industries such as vegetable industry, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications.
Typically the pumps are transferring liquids with fibres and solids coming from washing or blanching vegetables, potato waste, circulation of liquids on digesters, etc.
Your benefits
- Non-clogging, suitable for handling liquids with solids, fibres, foils and / or leaves
- Electropolished: higher resistance against corrosion
- Easy & robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers in investment cast material
- Standard components
Technical information
| Performance | |
| max. flow rate | 360 m³/h |
| max. differential head | 35 m |
| max. inlet pressure | 13 bar |
| max. liquid viscosity | 500 cP |
| max. temperature | 140°C |
| impeller type | open or vortex |
| max. free passage | 35 mm |
| max. motor power | 90 kW |
| max. toerental | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single bellow, single balanced, quench, double, pressurized barrier |
| available O-ring materials | EPDM, FKM, FEP-FKM |
| connectoins | BSP fittings, flanges according to EN1092-1/01 & 02, ANSI flanges |
| surface finish | industrial, internal welds not hand polished, electropolished |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the IFF series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.