Pump series ICP3
Pressed robust industrial pump
| Max. flow | 320 m³/h |
| Max. head | 120 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 90 kW |
Pump series ICP3
These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and have closed investment cast impellers in duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.
- Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 30 mm
- Large seal cavity to guarantee liquid circulation around the seal
- Monobloc execution with std. IEC motors
Application areas
The Packo pumps of the series ICP3 are used in a wide range of industries and applications.
You can find them in just about all industries such as vegetable industry, breweries, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications.
Typical liquids: blanching water, mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: higher resistance against corrosion
- Easy & robust construction and easy maintenance: less downtime
- Easy to install
- Solid impellers compared to low cost spot welded versions
- 2 mechanical seal diameters for entire range
- Standard components
Technical information
| Application areas | |
| max. flow rate | 320 m³/h |
| max. differential head | 120 m |
| max. discharge pressure | 15 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | closed with back vanes and balancing holes |
| max. free passage | 21 mm |
| max. motor power | 90 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single bellow, single balanced, quench, double, pressurized barrier |
| available O-ring materials | EPDM, FKM, FEP-FKM, FFKM, Silicone |
| connections | BSP fittings, flanges according to EN1092-1/01 & 02, ANSI flanges, smooth tubes |
| surface finish | industrial, internal welds not hand polished, electropolished |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the ICP3 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.