Pump series ICP2

Pressed robust industrial pump

Max. flow 110 m³/h
Max. head 220 m
Max. product viscosity 1.000 cP
max. motor power 90 kW
Request for offer Download technosheet

Pump series ICP2

These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and have open investment cast impellers in stainless steel 316L or duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

  1. Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 20 mm
  2. Investment cast impellers
  3. Large seal cavity to guarantee liquid circulation around the seal
  4. Monobloc execution with std. IEC motors

Application areas

The Packo pumps of the series ICP2 are used in a wide range of industries and applications.

You can find them in just about all industries such as vegetable industry, breweries, water treatment and textile industry as well as in eg biogas, biodiesel and bioethanol applications.

Typical liquids: blanching water, mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.



Your benefits

  • High pump efficiency resulting in lower energy consumption
  • Low NPSH values: less risk on cavitation
  • Electropolished: higher resistance against corrosion
  • Easy & robust construction and easy maintenance: less downtime
  • Easy to install
  • Solid impellers compared to low cost spot welded versions
  • 2 mechanical seal diameters for entire range
  • Standard components


Technical information

 Application areas  
 max. flow rate  110 m³/h
 max. differential head  220 m
 max. inlet pressure  13 bar
 max. liquid viscosity  1000 cP
 max. temperature  140°C
 impeller type  open
 max. free passage  22 mm
 max. motor power  90 kW
 max. speed  3000/3600 rpm
 available frequency  50/60 Hz
 materials wetted parts  stainless steel 316L or similar
 mechanical seal configuration  single bellow, single balanced, quench, double, pressurized barrier
 available O-ring materials  EPDM, FKM, FEP-FKM, FFKM, Silicone
 connections  BSP fittings, flanges according to EN1092-1/01 & 02, ANSI flanges, smooth tubes
 surface finish  industrial, internal welds not hand polished, electropolished
 certificates & legislation  

Request for offer

Assembly and disassembly videos

For all different configurations of the ICP2 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.

Assembly video - configuration with bellow seal
Assembly video - configuration with sterile seal
Assembly video - configuration with quench and bellow seal
Assembly video - configuration with double seal
Disassembly video - replacement of bellow seal
Disassembly video - replacement of sterile seal
Request for offer
Interested or questions? Our people are at your service.
Contact us