Pump series FPP3
Max inlet pressure 40 bar
| Max. flow | 350 m³/h |
| Max. head | 70 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 45 kW |
FPP3 pump series
The food grade Packo stainless steel pumps of the FPP3 series are pumps made of solid, machined stainless steel 316L and are extremely suitable for high system pressure applications up to 40 bar. Typical applications can be found in reverse osmosis applications in all kind of food related applications such as whey filtration, CIP waste filtration, beer filtration, etc.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Fully machined stainless steel, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motor with angular contact bearing.
Application areas
Monobloc execution with std. IEC motor with angular contact bearing.The Packo high pressure pumps of the FPP3 series are used primarily in the reverse osmosis (RO) applications for the filtration of, for example, contaminated CIP-water, whey, etc. They are also used as a booster pump in a variety of skids.
You will find them in just about all industries including the dairy industry, breweries, beverage industry as well as in water treatment industry.
Your benefits
- Suitable for system pressure applications up to 40 bar
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: easy to clean
- Easy construction and easy maintenance: less downtime
- Standard components
- Easy to install
- 1 mechanical seal diameter for the entire range
Technical information
| Performance | |
| max. flow rate | 350 m³/h |
| max. differential head | 70 m |
| max. inlet pressure | 40 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | closed |
| max. free passage | 17 mm |
| max. motor power | 45 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specifications | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single balanced, quench, double |
| available O-ring material | EPDM, FKM, FFKM |
| connections | Tri-Clamp connections |
| surface finish | hygienic quality, internal welds hand polished + electropolished |
| certificates & legislation |  |
