Pump series FP1
The best 'value for money' hygienic centrifugal pump
| Max. flow | 70 m³/h |
| Max. head | 37 m |
| Max. product viscosity | 1.000 cP |
| max. motor power | 5.5 kW |
Pump series FP1
The Packo stainless steel centrifugal pumps of the FP1 series are the best “value for money” food grade pumps, mainly used for pumping clean and slightly contaminated liquids. This series achieves an overall high efficiency, leading to a lower energy consumption for your production process. Thanks to its modular concept it also guarantees an easy maintenance.
- Electropolished, easy to clean construction, no bacteria traps and no small clearances in order to clean the area around the O-ring
- Pressed stainless steel in 2B quality plate, extremely smooth
- Large seal cavity to clean mechanical seal properly
- Monobloc execution with std. IEC motors
Application areas
FP1 pumps are mainly used for pumping clean and light contaminated products from dairies, cheese dairies, breweries, distilleries, beverage industry, etc.
They are often used as process pumps for heat exchangers, filtration units, filling machines, brine injectors, batter machines and CIP cleaning systems.
Typical fluids are milk, whey, curd, batter, brine, beer, CIP, alcohol, etc.
Your benefits
- High pump efficiency resulting in lower energy consumption
- Low NPSH values: less risk on cavitation
- Electropolished: easy to clean
- Easy construction and easy maintenance: less downtime
- Easy to install
- Best value for money
Technical information
| Performance | |
| max. flow rate | 70 m³/h |
| max. differential head | 37 m |
| max. inlet pressure | 6 bar |
| max. liquid viscosity | 1000 cP |
| max. temperature | 140°C |
| impeller type | open or semi-open |
| max. free passage | 18 mm |
| max. motor power | 5.5 kW |
| max. speed | 3000/3600 rpm |
| available frequency | 50/60 Hz |
| Specificaties | |
| materials wetted parts | stainless steel 316L or similar |
| mechanical seal configuration | single |
| available material O-ring | EPDM, FKM, FEP, FFKM |
| connections | hygienic fittings |
| surface finish | hygienic quality, internal welds hand polished + electropolished (casing 0.8 μm - impeller 3.2 μm) |
| certificates & legislation |  |
Assembly and disassembly videos
For all different configurations of the FP1 series you can find an assembly/disassembly video here. These videos show easy to follow steps to assemble the pumps and replace the seals.