• Properties

    Property
    Max. flow 110 m3/h
    Differential head 220 m wc
    Max. Inlet pressure 13 bar
    Viscosity 1000 cP
    Max. temperature 140 °C
    Impeller type Open 
    Max. free passage 22 mm
    Max. drive power 90 kW
    Speed 3000 / 3600 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single bellow, single balanced, quench, double, pressurized barrier
    Available O-ring materials EPDM, FKM, FEP-FKM, FFKM, Silicone
    Connections BSP fittings. flanges according to EN1092-1/01 & 02. ANSI flanges. smooth tubes 
    Surface finish Industrial, internal welds not hand polished, electropolished
    Certificates MEI. ATEX. EAC 
  • Description

    The highly efficient stainless steel Packo centrifugal pump series ICP2 are used in about all kind of industries such as vegetable industry, breweries, water treatment and textile industry as well as in e.g. biogas, biodiesel and bioethanol applications. Typical liquids are blanching water, mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.

Pump series ICP2

These robust pumps have stainless steel 316L pump casings constructed in thick cold rolled plate and have open investment cast impellers in stainless steel 316L or duplex materials. Thanks to its solid construction and electropolished design these pumps are the reliable component for your production process.

  1. Pressed stainless steel, pump casing thickness up to 8 mm, back plate up to 20 mm
  2. Investment cast impellers
  3. Large seal cavity to guarantee liquid circulation around the seal
  4. Monobloc execution with std. IEC motors

 

Application areas

The Packo pumps of the series ICP2 are used in a wide range of industries and applications.

You can find them in just about all industries such as vegetable industry, breweries, water treatment and textile industry as well as in eg biogas, biodiesel and bioethanol applications.

Typical liquids: blanching water, mash, wort, process and contaminated water, biodiesel, bioethanol, alcohols, CIP, biogas, etc.

Your benefits

  • High pump efficiency resulting in lower energy consumption
  • Low NPSH values: less risk on cavitation
  • Electropolished: higher resistance against corrosion
  • Easy & robust construction and easy maintenance: less downtime
  • Easy to install
  • Solid impellers compared to low cost spot welded versions
  • 2 mechanical seal diameters for entire range
  • Standard components

Performance Curves

Assembly and disassembly videos

Assembly video - configuration with bellow seal

Assembly video - configuration with bellow seal

Assembly video - configuration with sterile seal

Assembly video - configuration with sterile seal

Assembly video - configuration with quench and bellow seal

Assembly video - configuration with quench and bellow seal

Assembly video - configuration with double seal

Assembly video - configuration with double seal

Disassembly video - replacement of bellow seal

Disassembly video - replacement of bellow seal

Disassembly video - replacement of sterile seal

Disassembly video - replacement of sterile seal