Industrias Farmacéutica

Based on the FP2 model (for sanitary applications in general) the construction has been adapted to meet the even higher demands in a/p pure water-, pharmaceutical CIP/SIP- and WFI-installations.

The PHP2 range is available up to 100 m3/h / 440 US.GPM - 110 m / 370 ft - 22 kW / 30 hp.

The most noble materials

• All parts in contact with the medium are AISI 316L/DIN 1.4404 or better. Other materials, e.g. duplex or low ferrite content, are available.
• Materials that are not in contact, e.g. the adapter flange, motor base and motor shroud, are also made of stainless steel. 

The best surface finish

• All stainless steel parts are degreased, pickled, passivated and electropolished according to the Packo procedure POS-ADND-FLEP1008; All parts in contact have a guaranteed surface roughness up to less then 0.4 µm Ra. This offers an extremely low microroughness resulting in a highly increased resistance to corrosion, adhesion and the ultimate bacteriological purity.

Sterile design

• Crevice free design with absence of bacteria traps.
• Easy to clean (CIP) and sterilise (SIP).
• Fully drainable.
• design meeting the EHEDG specifications (EHEDG tested and certified).
• Sterile mechanical seal ideally suited to handle liquids with poor lubrication properties (e.g. WFI). Special seal materials and configurations are available.
• Sterile fittings

Functional design

• Modular design using standard components
• Solid construction
• PHP2 pumps stand for the optimum balance between sterile design, reliability, efficiency and NPSH.

Documentation

• For all PHP2 pumps Packo provides FDA, DIN EN 10204/2.2 or 3.1.B. material certification and certified measurements of performance and surface roughness.
• Certification is also available on ferrite, NPSH, pressure test, noise level reading, etc.