ISP2 and SCP2 are self priming pumps. They can lift liquid from a lower level into the pump.
The pumps are made of electropolished stainless steel 316L (or higher grade). The ISP2 has industrial connections (BSP or flanges) (picture on top), and the SCP2 has sanitary connections.
Standard IEC-motors. Standard mechanical seals, and only one seal diameter covers the whole range.
Heads up to 4,5 bar. Flow rates up to 90 m³/h. Up to 22kW. Leaflet in pdf
Picture right shows SCP2 pump with sanitary connections and motor shroud
6 air handling pumps in electropolished stainless steel 316L (or higher grade).
This pumps consist of the same pump components as the ICP2-pumps. Only the pump casing is different, i.e. the same impeller, the same seals, etc.
Standard connections are BSP and flanges, but the pump is available with sanitary fittings (IRP+ series)
Much higher efficiency and much lower noise levels compared with liquid ring pumps.
Standard IEC-motors. Standard mechanical seals, and only one seal diameter covers the whole range.
Heads up to 7 bar. Flow rates up to 180 m³/h. Up to 22kW. Leaflet in pdf
