• Properties

    Property
    Max. flow 40 m3/h
    Differential head 27 m wc
    Max. Inlet pressure 3 bar
    Viscosity 500 cP
    Max. temperature 95 °C
    Impeller type Open 
    Max. free passage 15 mm
    Max. drive power 2.2 kW
    Speed 3000 / 3600 rpm
    Available frequency 50 / 60 Hz 
    Materials wetted parts Stainless steel 316L or similar
    Mechanical seal configuration Single, quench
    Available O-ring Materials EPDM, FKM
    Connections BSP fittings. flanges according to EN1092-1/02. smooth tubes 
    Surface finish Industrial, internal welds not hand polished, electropolished
    Certificates ATEX. MEI. EAC 
  • Description

    The Packo stainless steel centrifugal pumps of the NP60 series are a low-cost industrial pump used for handling pure as well as slightly contaminated products up to 500 cP. They are often used as process pump for the colouring of textiles, for water treatment but also for handling solvents, alcohols and chemicals.

Pump series NP60

The Packo stainless steel centrifugal pumps of the NP60 series are low cost industrial pumps. They have investment cast open impellers. This series achieves an overall high efficiency, leading to a lower energy consumption for your production process. Thanks to its modular concept it also guarantees an easy maintenance.

  1. Pressed stainless steel with minimum thickness of 2 mm
  2. Investment cast open impellers
  3. Large seal cavity to guarantee liquid circulation around the seal
  4. Monobloc execution with std. IEC motors

 

Application areas

The NP60 pumps are mainly used for pure as well as slightly contaminated liquids up to a maximum viscosity of 500 cP.

They are often used as process pump for the washing of textiles, for water treatment, but also for pumping solvents, alcohols and chemicals.

 

Your benefits

  • High pump efficiency resulting in lower energy consumption
  • Low NPSH values: less risk on cavitation
  • Electropolished: easy to clean
  • Easy construction and easy maintenance: less downtime
  • Easy to install
  • Solid impellers compared to low-cost spot welded versions

Performance Curves

Assembly/Disassembly Videos

Assembly video - configuration with bellow seal

Assembly video - configuration with bellow seal

Assembly video - configuration with quench and elastomer bellow seal

Assembly video - configuration with quench and elastomer bellow seal

Disassembly video - replacement of bellow seal

Disassembly video - replacement of bellow seal

Assembly video - O-ring type mechanical seal

Assembly video - O-ring type mechanical seal